Pre-shipment Inspection for Fireplace, Oil heaters,Gas heaters|QTS

group name: Other Products Inspection Service

Min Order: 1 piece

update time: Mon, 16 Sep 2019 16:10:54 GMT

contact supplier

Paramtents

type QC,Inspections,loading,final random check
Fields Fireplace/Home Products
Brand QTS

Packging & Delivery

Min Order1 piece

Briefing

How to Make Sure Your Fireplace Are Safe, flames effects, performance and functional test needed, contact us for more details.

Detailed

Fireplace Pre-shipment Inspection Check Criteria

4.1 Packaging and Labelling

4.2 Packaging Contents

4.3 Product Aesthetic Inspection

4.4 Electrical Tests

4.5 Functional Checks

PRE-SHIPMENT INSPECTION CHECK CRITERIA

4.1 Packaging and Labelling

- Is the packaging dry, clean and tidy and free from damage?

- Is the product packaging labelled as per the drawing in Appendix (C)?

- Are all labels securely affixed to the carton?

- Is all print clearly legible

- Do the two product barcodes scan correctly?

- Are the cartons securely fastened?

- Are the two plastic carton carrying handles securely fitted so that they support the carton weight without damaging the cardboard, when the carton is lifted?

4.2 Packaging Contents

- Check that the pack contents are all present as per Appendix (D)

- Check that the design of the remote control is as per Appendix (E)

- Check that the Warranty booklet and User and installation booklet are present and are presented in black envelope

- Check that literature of high quality, clean, tidy and legible. Check that the issue status of the literature is Issue (A)

- Check that the mains lead is black, 1.5m long and has no obvious signs of damage.

- Check that the mains lead fits in the plug on the RH side of the product

4.3 Product Aesthetic Inspection

- Although the outer case of the product is not visible one the product is installed, It must be free from obvious scratches and mechanical damage which may result in a customer complaint or rejection when the product is unpacked and being installed

- Product to be free from corrosion or rust

- Check the front plinth rail and the side infill panels are present and correctly fitted with the right number of screws as per the photographs in Appendix (F).

- Check the rear and bottom of the appliance as per the photographs provided, in appendix (F), in particular that the screws are present and are blunt ended screws not pointed

- Check that the edges of the front and side glass windows are aligned without major overlaps or gaps, as per the photographs in Appendix (F).

4.4 Electrical Checks

- Check earth continuity test on all exposed (unpainted) metal work is less than 0.1 ohms.

- Check high pressure electrical (Flash test). The flash test should be performed at a voltage of 1375 volts for 2 seconds.

- Check Withstand voltage test Insulation resistance (IR). The I.R. dial should read a minimum of 20 mega ohms

- Check power consumption at high and low setting.

o low setting should be 700W +/- 10%

o High setting should be 1400W +/- 10%

4.5 Functional checks

Contact us for more function check details.